LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> Digital Radio Malfunction >> Circuit/System Testing >> Digital Radio Signal Circuit Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Digital Radio Signal Circuit Malfunction

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the CD changer.
  2. Radio ON, test for 5.0-7.5 volts between the signal circuit terminal 5 and ground.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the DRR.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the DRR.
  3. Test for 5.0-7.5 volts between the signal circuit terminal 13 and ground.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the DRR.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the DRR.
  4. Test for 5.0-7.5 volts between the signal circuit terminal 14 and ground.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the DRR.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the DRR.
  5. If all circuits test normal, replace the CD changer.
scientia non olet · About LEMON Manuals