Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Position the remote CD changer to the radio and connect the electrical lead.
- Install the retaining screws that secure the CD changer to the radio.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
- Connect the electrical/audio and coaxial cable connectors to the radio.
- Install the radio. Refer to Radio Replacement (Left Hand Drive) or Radio Replacement (Right Hand Drive) .
NOTE:
Refer to Fastener Notice
.