Antitheft Motion Sensor: Service and Repair

Theft Deterrent Sensor Replacement

Removal Procedure

1. Remove the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Service and Repair).




2. Pull on the intrusion sensor to disengage the sensor from the windshield garnish molding.
3. Remove the intrusion sensor from the windshield garnish molding.

Installation Procedure




1. Install the intrusion sensor in to the windshield garnish molding.
2. Push on the sensor to engage the sensor into place.
3. Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Service and Repair).