Passenger Seat Climate Control Module Replacement

Passenger Seat Climate Control Module Replacement

Removal Procedure

1. Remove the seat. Refer to Driver or Passenger Seat Replacement (Driver or Passenger Seat Replacement).




2. Remove the memory seat control module from the seat track assembly by cutting the tie straps.
3. Disconnect the harness connectors.

Installation Procedure




1. Connect harness connectors to the memory seat control module.
2. Install the memory seat control module to the seat track assembly using the tie straps.
3. Install the seat. Refer to Driver or Passenger Seat Replacement (Driver or Passenger Seat Replacement).
4. Refer to Control Module References (Programming and Relearning) for programming and setup information.