Installation Procedure

Fig 1: Identifying Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Fig 2: Locking Fuel Level Sensor Locking Tab

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not push on the electrical terminals.

Slide the fuel level sensor (1) downward until the locking tab (2) locks into place.

Fig 3: Identifying Fuel Level Sensor Electrical Connector Locking Tab

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not push on the electrical wires.

NOTE: Ensure the connector locking tab is fully seated into the flange.

Connect the fuel level sensor electrical connector (1).
Install the fuel tank pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Right Side .