LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System >> Diagnostic Information and Procedures >> DTC B0968 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the rear parking assist display.
  2. Ignition ON, test for 9.0-12.5 V between the supply voltage circuit terminal A and ground.
    • If less than the specified range, test the supply voltage circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the object alarm module.
    • If greater than the specified range, test the supply voltage circuit for a short to voltage. If the circuit tests normal, replace the object alarm module.
  3. Test for less than 0.3 V between the appropriate control circuit listed below and ground:
    • Amber 1 LED - terminal B
    • Amber 2 LED - terminal C
    • Red LED - terminal D
    • If greater than the specified range, test the control circuit for a short to voltage. If the circuit tests normal, replace the object alarm module.
  4. Ignition OFF, test for infinite resistance between the appropriate control circuit listed below and ground:
    • Amber 1 LED - terminal B
    • Amber 2 LED - terminal C
    • Red LED - terminal D
    • If not the specified value, test the control circuit for a short to ground. If the circuit tests normal, replace the object alarm module.
  5. Ignition ON, command the appropriate LED ON with a scan tool and test for less than 10 Ω between the appropriate control circuit listed below and ground:
    • Amber 1 LED - terminal B
    • Amber 2 LED - terminal C
    • Red LED - terminal D
    • If greater than the specified range, test the control circuit for an open/high resistance. If the circuit tests normal, replace the object alarm module.
  6. If all circuits test normal, test or replace the rear parking assist display.