LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection System >> Repair Instructions >> Front Object Alarm Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Object Sensor & Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
    NOTE: Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.
  1. Insert the sensor into the housing.
  2. Connect the electrical connector to the front object sensor.
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals