Seat Back Ventilation Heat and Cool Module - Driver (KB6)

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Back Ventilation Heat and Cool Module - Driver (KB6) Connector End View

Courtesy of GENERAL MOTORS COMPANY

Pin	Wire	Circuit	Function
1	1 PU	7023	Driver Seat Back Heated/Cool Ventilation Module Heat Control
2	0.5 D-BU	6143	Driver Seat Blower Supply Voltage
3	1 TN/PU	7024	Driver Seat Back Heated/Cool Ventilation Module Cool Control
4	0.5 D-GN	6238	Driver Seat Blower Low Reference
5	0.35 YE/BN	7020	Driver Seat Back Temperature Sensor Signal
6	-	-	Not Used
7	0.35 GY/PU	6211	Driver Seat Back Blower Speed Control
8	0.35 YE/WH	7021	Driver Seat Back Temperature Sensor Low Reference

Connector Part Information

Harness Type: Left Front Seat
OEM Connector: E3575-001
Service Connector: Service by Harness - See Part Catalog
Description: 8-Way F 1.5 mm Unsealed (BK)

Terminal Part Information

Pins: 1, 3
Terminated Lead: 13575818
Release Tool: J-38125-553
Diagnostic Test Probe: J-35616-3 (GY)
Terminal/Tray: 7114-4101-08/9
Core/Insulation Crimp: C/A

Pins: 2, 4-8
Terminated Lead: 13575818
Release Tool: J-38125-553
Diagnostic Test Probe: J-35616-3 (GY)
Terminal/Tray: 7114-4100-08/9
Core/Insulation Crimp: E/C