LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2010 >> DTS 4.6 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Wiring Systems And Power Management - Component Connector End Views - Engine Control Module X2 Through Pressure Control Solenoid) >> Component Connector End Views >> Lumbar Adjuster Switch - Driver (without A45)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Lumbar Adjuster Switch - Driver (without A45)

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lumbar Adjuster Switch - Driver (without A45) Connector End View
GM73146Courtesy of GENERAL MOTORS COMPANY
Lumbar Adjuster Switch - Driver (without A45)

Pin Wire Circuit Function
A 2 PU 767 Driver Seat Lumbar Motor Down Control
B 2 PK 610 Driver Seat Lumbar Motor Rearward Control
C 2 D-BU 611 Driver Seat Lumbar Motor Forward Control
D - - Not Used
E 2 BK 350 Ground
F 2 TN 768 Driver Seat Lumbar Motor Up Control
G 2 RD/PK 1140 Battery Positive Voltage
Connector Part Information
  • Harness Type: Left Front Seat
  • OEM Connector: 12052854
  • Service Connector: 15862656
  • Description: 7-Way F Metri-Pack 280 Series (BK)
Terminal Part Information
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12015858/4
  • Core/Insulation Crimp: F/G