LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2010 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System & Fuel System - 5.3L, 6.0L, 6.2L - DTC P0010 To DTC P0231/P025A >> DTC P0010 >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

    NOTE: If a crankshaft or camshaft position sensor DTC is set, the Camshaft Position Actuator output control will not function.
  1. Ignition ON, observe the DTC information with a scan tool. Verify DTC P0335, P0336, P0340, and P0341 is not set.
  2. Engine idling, command the Camshaft Position Actuator to 10° while observing the following control circuit status parameters with a scan tool:
    • The CMP Actuator Solenoid Ckt Short To Ground Test Status
    • The CMP Acutator Solenoid Ckt Open Test Status
    • The CMP Actuator Solenoid Ckt Short To Volts Test Status

      Each parameter should display OK or Not Run

  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals