Left Steering Wheel Switch Test
- Disconnect the harness connector at the S70L Steering Wheel Controls Switch - Left.
- Turn the cruise control switch in the ON position.
- Test the resistance between the terminals 1 and 2.
- If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the S70L Steering Wheel Controls Switch - Left.
| Function Switch | Minimum Resistance Value | Maximum Resistance Value |
|---|---|---|
| Set | 2.2 kΩ | 2.4 kΩ |
| Resume | 3.7 kΩ | 3.9 kΩ |
| Cancel | 1.4 kΩ | 1.6 kΩ |
| No Switch Pressed | 6.7 kΩ | 6.9 kΩ |