LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> Power Liftgate Malfunction (Liftgate Interior Release Open/Close Switch Malfunction) >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the interior liftgate control switch.
  2. Test for infinite resistance between the signal terminal D and the ground terminal C with the liftgate open switch in the inactive position.
    • If not the specified value, replace the interior liftgate control switch.
  3. Test for less than 3 Ω between the signal terminal D and the ground terminal C with the liftgate open switch in the active position.
    • If greater than the specified range, replace the interior liftgate control switch.
  4. Test for infinite resistance between the signal terminal A and the ground terminal C with the liftgate disable switch in the inactive position.
    • If not the specified value, replace the interior liftgate control switch.
  5. Test for less than 3 Ω between the signal terminal A and the ground terminal C with the switch in the disable position
    • If greater than the specified range, replace the interior liftgate control switch.
scientia non olet · About LEMON Manuals