Circuit/System Testing
- Ignition OFF, disconnect harness connector of the B47 fuel pressure sensor.
- Ignition OFF, test for less than 1.0 Ω between the low reference circuit terminal 2 and ground.
- If greater than the specified range, test the low reference circuit for an open/high resistance. If the circuit tests normal, replace the K27 fuel pump control module.
- Ignition ON, test for 4.8-5.2 V between the 5 V reference circuit terminal 3 and ground.
- If less than the specified range, test the 5 V reference circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K27 fuel pump control module.
- If greater than the specified range, test the 5 V reference circuit for a short to voltage. If the circuit tests normal, replace the K27 fuel pump control module.
- If all circuits test normal, replace the B47 fuel pressure sensor.