LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 1095 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> Speaker Malfunction >> Circuit/System Testing >> Amplifier Circuit Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Amplifier Circuit Malfunction

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X3 harness connector at the amplifier.
  2. Test for less than 10 ohms of resistance between the ground circuit terminal 8 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify a test lamp illuminates between the B+ circuit terminal 4 and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal and the circuit fuse is open, replace the amplifier.
  4. Disconnect the X1 harness connector at the amplifier.
  5. Radio ON, test for 0.6-1.0 volts between the signal circuit terminal 8 and ground.
    • If greater than the specified range, test the signal circuit for a short to voltage. If the circuit tests normal, replace the radio.
    • If less than the specified range, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.
  6. If all circuits test normal, replace the amplifier.
scientia non olet · About LEMON Manuals