Component Testing
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the VES actuator harness connector terminal A and B.
- Measure for 2.5-10 ohms of resistance between the VES actuator terminals.
- If not 2.5-10 ohms of resistance, replace the VES actuator.
- Measure for infinite ohms of resistance between each VES actuator terminals and the VES actuator housing.
- If less than the specified range, replace the VES actuator.