LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1021 (Trailer Brake Control System) >> Diagnostic Information and Procedures >> DTC C0800 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the DTC is history, refer to Charging System Test .
  2. If the DTC is current, start the engine, and measure the voltage between the battery positive voltage circuits of the TBCM and the ground circuit.
    • If the voltage is within 9-17 volts, replace the affected module.
    • If the voltage is not within 9-17 volts, measure the voltage between the battery positive voltage circuits of the TBCM and a separate good ground.
    • If the voltage is within 9-17 volts, test the battery positive ground circuits of the TBCM for high resistance or an open, and repair as necessary.