Circuit/System Verification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- With a scan tool, clear DTC C0550. The DTC should clear.
- If the DTC will not clear, replace the control module.
- Ignition OFF, remove the scan tool, open and close the drivers door.
- Wait 60 seconds, ignition ON, then recheck for DTCs. DTC C0550 should not set.
- If DTC C0550 sets, replace the module.