LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1219 (Data Communication System) >> Diagnostic Information and Procedures >> DTC U1886 >> Circuit/System Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Modules connected to the high and low speed GMLAN serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the transmitter module.

The serial data communication enable and the accessory wake up serial data circuits are energized by a specific module to activate another specific module when the ignition key is in ACC, ON or START. Only the modules using high speed GMLAN serial data are connected to the enable or wake up circuits. Refer to the schematics to determine which modules activate and are activated using the enable or wake up circuits.