LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1548 (Lighting System) >> Diagnostic Information and Procedures >> DTC B3884 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the center high mounted stop lamp.
  2. Test for less than 5.0 Ω between the ground circuit terminal B and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Connect a test lamp between the control circuit terminal A and ground circuit terminal B.
  4. Ignition ON, press and release the brake pedal. The test lamp should turn ON and OFF when changing between the selected states.
    • If the test lamp is always ON, test the control circuit for a short to voltage.
    • If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance.
  5. If all circuits test normal, test or replace the center high mounted stop lamp.
scientia non olet · About LEMON Manuals