Diagnostic Procedures
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the fuel tank.
- Remove the fuel tank.
- Plug the fuel feed hose, the fuel limiter vent valve hose, and the fuel tank vent valve hose on the fuel tank.
- Plug the fuel filler neck opening.
- Connect a piece of the hose to the breather hose nipple on the fuel tank and secure the hose with one clamp.
- Submerge the fuel tank in water or apply a soapy solution to the outside of the tank.
- Apply 1-2 psi (7-15 kPa) air pressure to the breather hose.
- Air bubbles appearing from the fuel tank indicate a leak.
- Replace the fuel tank if the tank is leaking.