Circuit Description

Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. When a module receives a message for a critical operating parameter, the module records the identification number of the module which sent the message for State of Health monitoring. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, DTC U1000 is set. When more than one critical parameter does not have an identification number associated with it, the DTC will only be reported once.

The class 2 serial data line on this vehicle is a star configuration, with the body control module (BCM) and powertrain control module (PCM) each have a second class 2 serial data line between them. The following modules communicate on the class 2 serial data line:

• The audio amplifier
• The body control module (BCM)
• The digital radio receiver (DRR)
• The driver door module (DDM)
• The driver seat module (DSM)
• The electronic brake control module (EBCM)
• The front passenger door module (FPDM)
• The HVAC control module
• The hybrid control module (HCM), for PHT
• The inflatable restraint sensing and diagnostic module (SDM)
• The instrument panel cluster (IPC)
• The powertrain/engine control module (PCM/ECM)
• The radio
• The rear seat audio (RSA) controller
• The rear seat entertainment (RSE) assembly w/U42
• The rear wheel steering control module (RWSCM)
• The remote playback device-CD player (CDX) w/U1S
• The transfer case shift control module (TCSCM)
• The transmission control module (TCM) w/Allison transmission
• The vehicle communication interface module (VCIM) w/UE1