Cylinder Head Assembly

Cylinder head bolts

DO NOT reuse the old cylinder head bolts

Right Sequence:

Left Sequence:

Cylinder Head Bolt - M8

First Pass 15 Nm (11 lb ft)
Final Pass 75 Degrees

Cylinder Head Bolt - M11

First Pass 30 Nm (22 lb ft)
Final Pass 150 Degrees

Warpage less than 0.05 mm (0.002 in)

Camshaft bearing cap

Right (DI):

Left (DI):

First pass 10 Nm (89 lb in)
Second pass bolts 1-4 loosen
Final pass bolts 1-4 10 Nm (89 lb in)

Intake manifold Specifications

Exhaust manifold Specifications

Camshaft gear Specifications