LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Diagnostic Information and Procedures >> Passenger Presence System Preload Test >> Passenger Presence System Preload System Test Procedure (Existing Module)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger Presence System Preload System Test Procedure (Existing Module)

  1. With Service Programming System (SPS) , unlock the passenger presence module.
  2. Empty the front passenger seat.
  3. With the scan tool, perform the Passenger Presence Sensor Learn procedure.
  4. If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area, and perform the Passenger Presence Sensor Learn procedure again.
  5. Once the test successfully completes, cycle the ignition key OFF.
  6. Perform the Diagnostic System Check - Vehicle after successfully completing the Passenger Presence Sensor Learn procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals