Circuit/System Testing
- Ignition OFF, disconnect the harness connector at the inside rearview mirror.
- Ignition ON, test for 9.5-10.5 V between the signal circuit terminal 10 and ground.
- If less than the specified range, test the circuit for a short to ground, shorted together, or an open/high resistance. If the circuit tests normal, replace the vehicle communication interface module.
- If greater than the specified range, test the circuit for a short to voltage. If the circuit tests normal, replace the vehicle communication interface module.
- Test for 9.5-10.5 V between the signal circuit terminal 10 and the low reference circuit terminal 2.
- If less than the specified range, test the low reference circuit for a short to ground, shorted together, or an open/high resistance. If the circuit tests normal, replace the vehicle communication interface module.
- If greater than the specified range, test the low reference circuit for a short to voltage. If the circuit tests normal, replace the vehicle communication interface module.
- If all circuit test normal, replace the inside rearview mirror.