Electronic Brake Control Module Scan Tool Information
Electronic Brake Control Module Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| ABS Active | No | The scan tool displays Yes or No. The scan tool will display Yes when the ABS is active and No during normal vehicle operation. |
| Brake Pressure Sensor | Varies | This displays psi. This is the current pressure at the brake pressure sensor. |
| Brake Pressure Sensor Input | Varies | This displays Volts. This is the current brake pressure sensor voltage. |
| Brake Temp Status | Normal | The scan tool displays Normal or Overtemp. The status of the brake temperature. Indicates if the brake temperature is above the traction control thermal cutoff point. |
| DRP Active | No | The scan tool displays Yes or No. The active status of the DRP. Indicates if DRP is currently active. |
| DRP Disabled | No | The scan tool displays Yes or No. The failed status of the DRP. Indicates if the EBCM disabled DRP due to a malfunction. |
| Ignition Voltage Signal | Varies | This displays Volts. This is the current ignition voltage signal. |
| Lateral Accelerometer Signal | Varies | This displays g. |
| Lateral Accelerometer Signal | Varies | This displays Volts. This is the current lateral accelerometer signal voltage. |
| Left TCS Isolation Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver side traction control system isolation solenoid. |
| Left TCS Prime Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver side traction control system prime solenoid. |
| LF Inlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver front inlet solenoid. |
| LF Outlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver front outlet solenoid. |
| LF Wheel Speed Sensor | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed at the driver front wheel speed sensor. |
| LR Inlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver rear inlet solenoid. |
| LR Outlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the driver rear outlet solenoid. |
| LR Wheel Speed Sensor | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed at the driver rear wheel speed sensor. |
| Pump Motor Relay Command | Off | The scan tool displays On or Off. This is the current state of the pump motor relay. |
| Pump Motor Relay Feedback Signal | Off | The scan tool displays On or Off. This is the current state of the pump motor relay feedback signal. |
| RF Inlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger front inlet solenoid. |
| RF Outlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger front outlet solenoid. |
| RF Wheel Speed Sensor | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed at the passenger front wheel speed sensor. |
| Right TCS Isolation Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger side traction control system isolation solenoid. |
| Right TCS Prime Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger side traction control system prime solenoid. |
| Rough Road Detected | Varies | This displays g. |
| RR Inlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger rear inlet solenoid. |
| RR Outlet Solenoid Command | Off | The scan tool displays On or Off. This is the current state of the passenger rear outlet solenoid. |
| RR Wheel Speed Sensor | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed at the passenger rear wheel speed sensor. |
| Solenoid Relay Command | Off | The scan tool displays On or Off. This is the current state of the solenoid relay. |
| Solenoid Relay Feedback Signal | Off | The scan tool displays On or Off. This is the current state of the solenoid relay feedback signal. |
| Steering Position Sensor | Varies | This displays °. This is the current angle of the steering position sensor. |
| Steering Sensor Is Centered | Yes | The scan tool displays Yes or No. Yes is displayed if the steering sensor is centered. |
| Switched Battery Voltage Signal | Varies | This displays Volts. This is the current switched battery voltage signal. |
| SWPS Signal A | Varies | This displays Volts. This is the current steering wheel position sensor A signal voltage. |
| SWPS Signal B | Varies | This displays Volts. This is the current steering wheel position sensor B signal voltage. |
| TCS Active | No | The scan tool displays Yes or No. This is the state of the traction control system. |
| TCS Enable | Enabled | The scan tool displays Enabled or Disabled. This is the state of the traction control system. |
| Vehicle Speed | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed. |
| VSES Active | Varies | The scan tool displays Yes or No. This is the state of the vehicle stability enhancement system. |
| VSES Enabled | Varies | The scan tool displays Yes or No. This is the state of the vehicle stability enhancement system. |
| Yaw Rate Sensor | °/sec | The scan tool displays °/sec. The scan tool displays the signal received from the yaw rate sensor. |
| Yaw Rate Signal | Varies | This displays Volts. This is the current yaw rate signal voltage. |
Electronic Brake Control Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Automated Bleed | This is used in order to bleed ABS hydraulics. Refer to Antilock Brake System Automated Bleed . |
| LF Inlet Valve Solenoid | Commands the solenoid ON and OFF. |
| LF Outlet Valve Solenoid | Commands the solenoid ON and OFF. |
| LR Inlet Valve Solenoid | Commands the solenoid ON and OFF. |
| LR Outlet Valve Solenoid | Commands the solenoid ON and OFF. |
| RF Inlet Valve Solenoid | Commands the solenoid ON and OFF. |
| RF Outlet Valve Solenoid | Commands the solenoid ON and OFF. |
| RR Inlet Valve Solenoid | Commands the solenoid ON and OFF. |
| RR Outlet Valve Solenoid | Commands the solenoid ON and OFF. |