Television Antenna Module Scan Tool Information
Television Antenna Module Scan Tool Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Antenna 1-4 Status | - | OK | The scan tool displays OK, Short to GND, Disconnected. This is the status of the specified antenna. |
| Antenna Receiving Audio | - | Varies | The scan tool displays Antenna 1-4. This is the status of the antenna receiving audio. |
| Antenna Receiving Video | - | Varies | The scan tool displays Antenna 1-4 and last selected. This is the status of the antenna receiving video. |
| Base Model Part Number | - | Varies | The scan tool displays the base module part number. |
| Battery Voltage | - | Varies | The scan tool displays volts. This is the current battery voltage. |
| End Module Part Number | - | Varies | The scan tool displays the end mode part number. |
| Fan Status | - | OFF | The scan tool displays the status of the TV antenna modules cooling fan. |
| Julian Date of Build | - | Varies | The scan tool displays the julian date of build. |
| Module Temperature | - | Varies | The temperature is measured in C°. This is the current temperature of the module. |
| Point of Sale | - | Not Available | The scan tool displays Not Available, Central Europe, Italy, UK/Ireland/HK, East Eur. PAL, East Eur. SECAM, France, North America, Australia, Brazil, Argentina, New Zealand, Middle East, China, Africa PAL, Africa SECAM, Greece, Japan, Saudi Arabia, and Morocco. This is the intended destination of the vehicle. |
| Software Part Number | - | Varies | The scan tool displays the software part number. |
| Year Module Built | - | Varies | The scan tool displays the year module built. |
Television Antenna Module Output Controls
| Scan Tool Output Control | Description |
|---|---|
| TV Region Lockout | This output control does not allow you to change regions. |
| TV Region Select | This output control will let you select through the different regions. |