Rearview Camera Replacement (Endgate)

Fig 1: Rearview Camera Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the endgate latch handle bezel. Refer to Pickup Box Endgate Latch Handle Bezel Replacement (Pickup) .
1	Endgate Access Panel Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Endgate Access Panel
3	Rearview Camera Screw (Qty: 3)
4	Rearview Camera Procedure Route the electrical harness through the guide. Disconnect the electrical connector.