Video Display Replacement (Second Row)

Fig 1: View Of Video Display & Screws (U42)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Video Display Assembly Screw (Qty: 4) CAUTION: Refer to Fastener Caution . TIP: Make sure that all 4 washers on the 4 mounting screws are accounted for. If any washers are off the screw and loose, discard to prevent a rattle. The washers were required only for assembly plant installation, and can be used if still on the screw or they can be discarded. Tighten 2 N.m (18 lb in)
2	Video Display Assembly Pull down to disengage the retainer clip and remove from the vehicle. Disconnect the electrical connector.