Video Display Replacement (Third Row)

Fig 1: View Of Video Display Assembly & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Video Display Assembly Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in) TIP: Make sure that all 4 washers on the 4 mounting screws are accounted for. If any washers are off the screw and loose, discard to prevent a rattle. The washers were required only for assembly plant installation, and can be used if still on the screw or they can be discarded.
2	Video Display Assembly Pull down to disengage the retainer clip and remove from the vehicle. Disconnect the electrical connector.