Circuit/System Testing
- Ignition OFF, disconnect the digital radio antenna coax cable from the A11 radio. Connect the EL-48028 to the radio and place on the roof of the vehicle.
- Ignition ON, radio tuned to XM channel 1. Verify DTC B125C is not set as current and XM reception is improved.
- If DTC B125C is set as current or the reception is not improved, replace the A11 radio.
- Ignition OFF, reconnect the antenna coax cable at the A11 radio. Disconnect the antenna coax cable from the T4G antenna.
- Ignition ON, radio ON, test for 4.5-5.5 V between the antenna coax cable center terminal and an outer shield.
- If less than the specified range, test the antenna coax cable for an open/high resistance or a short to ground.
- If greater than the specified range, test the antenna coax cable for a short to voltage.
- If all circuits test normal, replace the T4G antenna.