LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1015 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Ball Joint Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Use the outer flange of the ball joint in order to press the ball joint into place.
  1. Install the ball joint using a press.
  2. Place the lower control arm a bench vise.
  3. Using a punch, install the crimps to the ball joint, if necessary. Use the replaced ball joint as a reference.
  4. Install the lower control arm in the vehicle. Refer to Lower Control Arm Replacement (1500)  or Lower Control Arm Replacement (2500, 3500) 
  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Remove the safety stand and lower the vehicle.
  7. Verify the wheel alignment. Refer to Wheel Alignment Specifications .
scientia non olet · About LEMON Manuals