Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice .

Fig 1: Wheel Speed Sensor Bolt

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor and bolt (1) to the suspension knuckle.
Tighten: Tighten the bolt to 9 N.m (80 lb in).

Fig 2: Wheel Speed Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
Connect the wheel speed sensor electrical connector (2).
Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .