LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: During installation ensure that the child tether anchors are installed with the anti-rotation tabs firmly seated in the anti-rotation tab holes on the cross car beam.
    Fig 1: Child Tether Anchor & Bolt
    GM729861Courtesy of GENERAL MOTORS CORP.
  1. Install the child tether anchor to the cross car beam.
    2. NOTE: Refer to Fastener Notice .
  2. Install the child tether anchor bolt.

    Tighten:  Tighten the bolt to 30 N.m (22 lb ft).

  3. Install the rear shelf trim panel. Refer to Rear Window Panel Trim Replacement .
scientia non olet · About LEMON Manuals