LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Hybrid Engine Electrical System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray Components
    GM1968744Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray (3) into the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the battery tray to battery tray reinforcement bolts (1).

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the battery tray support bolts (2).

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Install the battery tray to auxiliary BEC bolt (4).

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  5. Install the positive and negative battery cables.
  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals