Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Ground Strap Nut At Front Of Dash Stud

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the ground strap to the stud.
Install the ground strap nut to the stud at the front of dash.
Tighten: Tighten the nut to 9 N.m (80 lb in).

Fig 2: View Of Ground Cable Bolt At Engine Block

Courtesy of GENERAL MOTORS CORP.

Position the ground strap and engine wiring harness ground.
Install the engine wiring harness ground bolt.
Tighten: Tighten the bolt to 16 N.m (12 lb ft).