Circuit/System Verification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Verify DTC C056E 42 is not set.
- If DTC C056E 42 is set, perform the PSCM programming and setup procedures. If DTC C056E 42 resets, replace the PSCM.
- Verify DTC C056E 4B is not set.
- If DTC C056E 4B is set, perform the steering position/torque sensor calibration. If DTC C056E 4B resets, replace the PSCM.