LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1220 (Hybrid Engine Control System) >> Diagnostic Information and Procedures >> DTC P2797 >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON with the engine OFF, command the Aux. Trans. Pump Speed to 50 percent with the scan tool.
  2. Observe the aux. trans. fluid pump actual display and the aux. trans. fluid pump commanded displays with the scan tool. Actual pump speed should be within 10 percent of commanded.
    • If the actual speed is within 10 percent of commanded speed an electrical fault condition is not present, if an aux. trans. fluid pump pressure fault is suspected, test the aux. trans. pump line pressure output. Refer to Line Pressure Check .
    • If the difference between actual and commanded speed is greater than 10 percent, proceed to Circuit/System Testing.
scientia non olet · About LEMON Manuals