Removal Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery positive and negative cable. Refer to Battery Positive and Negative Cable Replacement (LZ4) or Battery Positive and Negative Cable Replacement (LY7) or Battery Positive and Negative Cable Replacement (LE5) .
- Mark the location of the battery current sensor on the battery positive and negative cable with tape for reference during installation.
- Remove the tape securing the battery current sensor to the battery positive and negative cable.
- Mark the location of the battery positive and negative cable clips and remove the clips from the cable.
- Squeeze the battery positive and negative cable branches together.
- Slide the battery current sensor (1) off of the battery positive and negative cable.
IMPORTANT:
Note the orientation of the battery current sensor prior to removal.