LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1471 (Engine Controls And Fuel - 2.4L - Introduction) >> Repair Instructions >> Accelerator Pedal with Position Sensor Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accelerator Pedal Position Sensor
    GM1883846Courtesy of GENERAL MOTORS CORP.
  1. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement .
  2. Disconnect the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor (1).
    3. Fig 2: APP Sensor And Bolts
    GM1883847Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor bolts (1).
  4. Remove the APP sensor (2).
scientia non olet · About LEMON Manuals