LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1558 (Fixed And MOVEABLE Windows System) >> Repair Instructions >> Rear Sliding Window Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear sliding window motor/module assembly to the vehicle.
    2. Fig 1: View Of Sliding Window Motor Module & Components
    GM1852042Courtesy of GENERAL MOTORS CORP.
  2. Connect the rear sliding window electrical connectors to the motor/module and relays (1).
    3. Fig 2: View Of Regulator & Screw
    GM1852031Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the rear sliding window motor/module nuts (2).

    Tighten:  Tighten nut to 10 N.m (89 lb in).

  4. Install the rear sliding window regulator and cables (2) to the motor/module.
  5. Install the bolt (1) to the rear sliding window regulator and cables (2).

    Tighten:  Tighten bolt to 11 N.m (97 lb in).

  6. Install the rear sliding window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish Molding Replacement (Ext Cab/Crew Cab w/o A48) or Rear Window Lower Garnish Molding Replacement (Regular Cab) .
  7. Inspect the rear sliding window for proper operation.
scientia non olet · About LEMON Manuals