Front Seat Heater Control Module Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket . |
|
| 1 | Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power) or Front Seat Cushion Outer Trim Panel Replacement (Manual) . |
| 2 | Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement . |
| 3 | Driver Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement . |
| 5 | Front Seat Heater Control Module Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 6 | Front Seat Heater Control Module Tip: Disconnect the electrical connector. |