Circuit/System Testing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify that no G13 Generator or B18 battery current sensor DTCs are set that would cause a charging system concern.
- If DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Ignition OFF, measure the voltage across the battery terminals. The voltage should read 12.0 V or greater at room temperature.
- If not within the specified value, refer to Battery Inspection/Test .
- Engine ON, increase engine speed to 2, 500 RPM. Verify the battery voltage is between 12.6-15.0 V.
- If not within specified range, replace the G13 generator.
- Engine ON, increase engine speed to 2, 500 RPM. Turn ON all vehicle accessories. Verify the battery voltage is between 12.6-15.0 V.
- If not within specified range, replace the G13 generator.
NOTE:
Ensure vehicle accessories are OFF for the next step.