Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Squeeze the negative battery cable branches together.
- Slide the NEW battery current sensor (2) up onto the negative battery cable to the location previously marked during removal.
- Wrap electrical tape around the battery current sensor leg in order to secure the sensor to the negative battery cable.
- Install the negative battery cable clips (1) to the cable to the locations previously marked during removal.
- Install the negative battery cable. Refer to Battery Negative Cable Replacement .
IMPORTANT:
Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.