Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
- Mark the location of the battery current sensor on the battery cable with tape for reference during installation.
- Remove the tape securing the battery current sensor to the negative battery cable.
- Mark the location of the negative battery cable clips (1) and remove the clips from the cable.
- Squeeze the negative battery cable branches together.
- Slide the battery current sensor (2) off of the negative battery cable.
IMPORTANT:
Note the orientation of the battery current sensor prior to removal.