LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1775 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Hold Down Retainer And Bolt
    GM1702812Courtesy of GENERAL MOTORS CORP.
  1. Install the battery.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the battery hold down retainer and the bolt.

    Tighten 

    Tighten the retainer bolt to 25 N.m (18 lb ft).

    3. Fig 2: Front Fender Rear Upper Brace And Bolts
    GM1702811Courtesy of GENERAL MOTORS CORP.
  3. Install the right front fender rear upper brace and the bolts.

    Tighten 

    Tighten the brace bolts to 9 N.m (80 lb in).

    4. Fig 3: Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS CORP.
  4. Install the starter solenoid cable to the positive battery terminal.
  5. Tighten the starter solenoid cable nut (5).

    Tighten 

    Tighten the solenoid cable nut to 5 N.m (44 lb in).

  6. Close the starter solenoid cable cover at the positive battery terminal.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals