LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1775 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Tray, Brackets And Nuts
    GM1702822Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 3 nuts securing the battery tray to the battery tray bracket.

    Tighten 

    Tighten the nuts to 20 N.m (15 lb ft).

  3. Install the nut securing the battery tray to the front fender inner panel.

    Tighten 

    Tighten the nut to 9 N.m (80 lb in).

    4. Fig 2: Battery Tray Front Support
    GM1702819Courtesy of GENERAL MOTORS CORP.
  4. Install the battery tray front support.
  5. Install the battery tray front support bolts.

    Tighten 

    Tighten the bolts to 20 N.m (15 lb ft).

  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals