Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Battery Jumper Cable

Courtesy of GENERAL MOTORS CORP.

Install the generator battery jumper cable to the vehicle.

Fig 2: Generator Battery Jumper Cable

Courtesy of GENERAL MOTORS CORP.

Install the generator battery jumper cable terminal (4) to the mega fuse stud.

CAUTION:

Refer to Fastener Caution .

Install the generator battery jumper cable to the mega fuse nut (3).
Tighten

Tighten the mega fuse nut to 9 N.m (80 lb in).
Install the generator battery jumper cable clip (2) to the A/C evaporator tube.
Install the generator battery jumper cable clip (1) to the stud.

Fig 3: Mega Fuse Cover

Courtesy of GENERAL MOTORS CORP.

Install the mega fuse cover.

Fig 4: Battery Jumper Cable Terminal, Nut And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the generator battery jumper cable terminal (1) to the generator stud.
Install the generator battery jumper cable nut (2) to the generator.
Tighten

Tighten the jumper cable nut to 9 N.m (80 lb in).
Position the generator battery jumper cable boot (3).
Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .