Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Bracket

Courtesy of GENERAL MOTORS CORP.

Position the generator bracket to the engine.

CAUTION:

Refer to Fastener Caution .

Install the generator bracket bolts.
Tighten

Tighten the bolts to 50 N.m (37 lb ft).

Fig 2: Engine Wiring Harness, Clip, Bolt And Connectors

Courtesy of GENERAL MOTORS CORP.

Position the engine wiring harness clip (1) to the generator bracket and install the engine harness clip bolt (3).
Tighten

Tighten the bolt to 9 N.m (80 lb in).
Install the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) .
Install the generator. Refer to Generator Replacement .