Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the generator.

CAUTION:

Refer to Fastener Caution .

Install the generator bolts.
Tighten

Tighten the generator bolts to 55 N.m (41 lb ft).

Fig 2: Battery Jumper Cable Terminal, Nut And Bolt

Courtesy of GENERAL MOTORS CORP.

Install the generator battery jumper cable terminal (1) to the generator stud.
Install the battery jumper cable nut (2) to the generator.
Tighten

Tighten the cable nut to 9 N.m (80 lb in).
Position the battery jumper cable boot (3).

Fig 3: Generator & Related Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the engine harness electrical connector (3) to the generator.
Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory .
Install the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .