LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1780 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> DTC B153F >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Object Detection Sensor Status parameter. The reading should be between 3-3.5 V.
    • If not within the specified range, perform the Circuit/System Testing.
  2. Observe the scan tool Object Sensor Supply Voltage parameter while pressing and releasing the liftgate object sensor - right. The reading should change from Inactive to Active as the sensor is pressed and released.
    • If the value does not change, test or replace the B71R liftgate object sensor - right.
  3. Observe the scan tool Object Sensor Supply Voltage parameter while pressing and releasing the liftgate object sensor - left. The reading should change from Inactive to Active as the sensor is pressed and released.
    • If the value does not change, test or replace the B71L liftgate object sensor - left.
  4. Command the liftgate to power close by pressing the liftgate close switch and as the liftgate is closing, press the liftgate object sensor - right or the liftgate object sensor - left. The liftgate should stop and power open.
    • If the liftgate continues to power close, replace the K39 liftgate module.
scientia non olet · About LEMON Manuals